New Capacity and Capability at ShapeCUT

For over 25 years, ShapeCUT has established itself as QLD’s premier steel profile cutter. ShapeCUT is also Qld’s largest privately owned steel profile cutting company. We are recognised in providing professional service and advice you can depend upon.

ShapeCUT has 14 CNC profile machines which include the following:

PLASMA

ShapeCUT have 5 high definition plasma cutters. Tables sizes up to 96mtrs x 7mtrs. ShapeCUT have capacity to cut the world’s largest manufactured steel plates.

Our high definition plasma cutting machines are fast and accurate with CNC controlled drill heads to tap holes too small to cut or require a high level of accuracy. 

OXY

ShapeCUT have five oxy cutting machines with eight cutting heads. These powerful machines operate on cutting tables 22mtrs x 4mtrs and are capable of cutting steel up to 300mm thick. 

LASER CUTTING

ShapeCUT have two laser cutting machines. Our table size, 2m x 6m & 3m x 12m, allows us to cut longer and wider parts not always achievable on other lasers. Our lasers offer a high degree of accuracy with a tolerance of +/- 0.2mmand can cut up to 25mm thick mild steel. 

ROUTER CUTTING

ShapeCUT have two Aluminium Routers. Our bed size is 2.5m wide x 6m long & 2.5m wide x 12m long. Our routers can cut up to 42mm thick aluminium plates and provide a quality finish. 

ShapeCUT – YOUR SOLUTION FOR METAL PROCESSING

In addition to fast quality Oxy, Plasma, Laser and Router profile cutting, we also offer the following services:

  • Pressing & Rolling
  • Machining 
  • Bevelling 
  • Tapping, Drilling and Countersinking

STOCK

ShapeCUT has the largest range of stocked plate in the QLD market. We currently carry approximately 4500T of steel plate on site at our specialist steel cutting facility in Brisbane. ShapeCUT have a network of reputable suppliers with access to all grades, sizes and thicknesses from 0.5mm to 300mm

CARBON STEEL PROCESSING

  • LASER CUTTING – 1mm to 16mm​​
  • PLASMA CUTTING – 5mm to 25mm​
  • OXY CUTTING – 16mm to 300mm

GRADES 

  • 250 & 350​
  • BP460       ​
  • K1042​
  • HIGH TENSILE 80​
  • WEAR PLATE 400/450/500​
  • WELDED PLATE​

STAINLESS STEEL PROCESSING

  • LASER CUTTING – 0.55mm to 16mm​
  • PLASMA CUTTING – 12mm to 25mm​

GRADES 

  • 304 – 2B, N4, N8, & BA​
  • 316 – 2B & N4    ​
  • 304 TREAD PLATE

ALUMINIUM PLATE PROCESSING

  • LASER CUTTING – 0.6mm to 2.5mm​
  • ROUTER CUTTING – 3mm to 40mm ​

GRADES 

  • 5005​
  • 5052​
  • 5083​
  • 5052 PROPELLER PLATE & TREAD PLATE​
  • 6061 (MACHINE GRADE PLATE)​

Place your order today with ShapeCUT. Simply call us on 1800 SHAPECUT to discuss your requirements.